VIPowER USB 2.0, 5.25-inch External Enclosure VP-6228T Installation Guide download pdf (Page 33)

Super Rack 1-3

1-1 Introduction

Congratulations on your purchase of an ATA 33/66/100/133 Super Rack

Removable Docking Module. The Super Rack is a convenient, versatile solution

for portable, interchangeable usage of both IDE and USB devices with your

USB-equipped PC or Mac computer.

The Super Rack is form-fitted for a standard 5.25" half-height bay. When installed

in your computer, it provides the ATA 33/66/100/133 interface for hot-swapping

any IDE in-tray box (with IDE devices such as 3.5”/2.5” HDD, LS-120, MO,

TR-4 tape, ATA flash memory reader, and zip drives installed) or any USB in-tray

box (such as hub, fax/modem, memory card readers and TV/FM/capture/cable

models).

The Super Rack includes an IDE interface in-tray (VP-15) which can accept most

half-height 3.5" and 2.5" drives (with separately purchased adapter cables). Not being

limited by memory size, you can install any capacity drive. USB interface in-tray

box models must be purchased separately.

This manual will guide you through the installation of the following Super Rack

Removable Docking Modules.

Super Rack Models:

VP-10LSFU IDE/USB interface, Latch-lock/Slide Switch with One Fan

VP-10KPFU IDE/USB interface, Key-lock Power Switch with One Fan

VP-410LS2FU IDE/USB interface, Latch-lock/Slide Switch with Two Fans

VP-410KP2FU IDE/USB interface, Key-lock Power Switch with Two Fans

VP-15 IDE interface, In-Tray Box

Super Rack Compatible USB In-tray Models:

VP-15H USB 1.1 4-port Hub

VP-15H2 USB 2.0 4-port Hub (requires USB 2.0 equipped computer)

VP-15M USB Fax/Modem

VP-15CF USB CompactFlash Memory Card Reader

VP-15SM USB SmartMedia Memory Card Reader

VP-15MS USB Memory Stick Memory Card Reader

VP-15MMC USB MMC Memory Card Reader

VP-15TV USB TV/FM/Capture/Cable

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

No comments

VIPowER USB 2.0, 5.25-inch External Enclosure VP-6228T Installation Guide Page 33